Signal Routing Examples - AJA Ki Pro Ultra 12G Installation And Operation Manual

File based recorder/player
Hide thumbs Also See for Ki Pro Ultra 12G:
Table of Contents

Advertisement

91. 1 Recall Preset
This parameter recalls the Ki Pro Ultra 12G to a previously saved preset
configuration stored using parameter 92.1. Push the User Control Knob to enter
the Preset Recall scale and scroll to choose the Preset (1 to 20). Press the knob to
select and confirm action by scrolling and clicking on OK or Cancel.
92. 1 Store Preset
This parameter saves a preset configuration to the selected storage register.
Use the User Control Knob to scroll to the number of the Preset register. To
store, press the knob, and then select and press OK. The message [COMPLETE] is
displayed after a successful store.
99. 1 Factory Reset
Selecting this parameter and then pressing the User Control Knob brings up the
Confirm Action screen. Press on OK to recall Ki Pro Ultra 12G's factory default
settings.
Caution!
current settings
Recalling factory defaults does not affect these settings:
Encode Mode
Encode Type

Signal Routing Examples

Since the Ki Pro Ultra 12G can receive a variety of signals via quad, dual or single
link SDI, what follows are examples of how the In Convert, Out Convert, SDI
Output and Video Input work in combination with each other.
Example 1: 12G Signal Flow (Single Channel Mode only)
The source device is outputting a 12G-SDI 4K YCbCr 59.94 signal over a single
link BNC that is connected to the Ki Pro Ultra 12G's SDI 1 input. The user wants to
encode the input as Apple ProRes 422 HQ at a 4K raster size, and simultaneously
convert it to an UltraHD 12G signal.
For this example, an optional SFP is installed in Ki Pro Ultra 12G's Fiber 1 Output
port, allowing single link 12G transport over long distances. This output is in
addition to the 12G output always supported by its SDI 1 BNC output connector
when operating in Single Channel Mode.
Ki Pro Ultra 12G File Based Recorder/Player v1.0
Selecting this parameter and recalling factory defaults overwrites the
.
IP Config
IP Address
Subnet Mask
System Name
Date and Time
61
www.aja.com

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents