AJA Ki Pro Ultra 12G Installation And Operation Manual page 52

NOTE: When configured for a 12G or 6G signal, this menu is hidden and Ki Pro Ultra 12G
Auto (default)
Square
2SI
NOTE: If Menu 2.1, "Video Input" is one of the formats below, input is automatically
• SDI 1 YCbCr
• SDI 1 RGB
• Fiber 1 YCbCr
• Fiber 1 RGB
• HDMI
2.2 Audio Input
(Single Channel Mode only.) This parameter selects an audio input source from
the audio input connections available, including embedded SDI audio (which
requires an SDI video source) or analog audio (via the DB-25 connections).
AES
HDMI
SDI/Fiber (default)
Analog
2.3 Audio Channels
This parameter selects the use of either two, eight, or 16 audio channels.
Generally, when working with camera sources, there are only one or two audio
tracks being produced, and therefore 2-channel would be the appropriate
selection. In post production use, there are often more channels of audio
required, so 8- or 16-channel audio may be the appropriate choice in such
situations.
NOTE: Not all devices support 8- or 16-channel audio, and Ki Pro Ultra 12G does not
2 Channels (default)
8 Channels
16 Channels
NOTE: This setting can affect which audio channels are embedded to the live SDI and
2.4 Headphone Audio
This parameter allows you to select one of four audio pairs to monitor through
the headphone port. This setting also affects the rear RCA audio monitor jacks
and the front panel VU meters. The options are:
• Channels 1 & 2
• Channels 3 & 4
• Channels 5 & 6
• Channels 7 & 8
• Channels 9 & 10
Ki Pro Ultra 12G File Based Recorder/Player v1.0
runs as 2SI.
Attempts to use VPID to determine the input format. If there is a
Forces the input to Square Image Division.
Force the input to 2SI image division.
selected and the "Image Division Input" parameter setting has no effect.
Selects AES digital audio input from the DB-25 input connector
Selects embedded audio from the HDMI input
Selects SDI embedded audio from the SDI or Fiber input
connector (if SDI video input is selected)
Selects Analog audio input from the DB-25 input connector
provide a mixdown to 2-channel audio option. Be sure to match the number of
audio channels to the capabilities of the downstream devices.
HDMI Outputs during recording.
signal/format mismatch a warning/alarm is raised.
Selects recording of 2 audio channels
Selects 8 audio channels
Selects 16 audio channels (valid for SDI embedded audio only)
52 www.aja.com