Power Connector - AJA Ki Pro Ultra 12G Installation And Operation Manual

NOTE: When using the Ki Pro Ultra 12G HDMI connection and attaching it to any HDMI
Ethernet
An RJ-45 connector provides a 10/100/1000 Ethernet port for connecting
Ki Pro Ultra 12G directly to a computer or Ethernet hub or switch for connecting
to a LAN. Ki Pro Ultra 12G is compatible with CAT-5 straight-through or cross-over
Ethernet cables, automatically detecting which is used. Once connected and
properly configured, Ki Pro Ultra 12G can then be controlled by a web browser on
the LAN.
8-Channel Balanced Analog Audio I/O
Two DB-25 TASCAM pinout, one input and one output, provide 8-channel
balanced audio. Audio is high-quality 24-bit A/D input and D/A output at 48kHz.
Level adjustments are made via software. Software level adjustments for analog
audio (parameter 4.1) apply to balanced audio.
AES Digital Audio I/O
AES digital audio connections consist of one DB-25 TASCAM pinout for 8 channels
of input and 8 channels of output.
RS-422 Connector
Ki Pro Ultra 12G offers a 9-pin serial port that may be used with compatible
RS-422 devices.
IMPORTANT: Not all RS-422 devices have been tested with Ki Pro Ultra 12G, so AJA cannot
For details on using RS-422 machine control setup, see
page

Power Connector

On the back of Ki Pro Ultra 12G are two standard 4-pin male XLR connectors
for supplying 12-Volt DC power to the unit. You can use either the supplied AC
Adapter or furnish your own battery source. Since the connector is an industry
standard pinout, choices are varied and flexible. Many 3rd party vendors offer
products using this standardized power connector.
• Pin 1: -
• Pin 4: +
• Pins 2 and 3: not used
Caution!
unit, remove the 4-pin XLR power connector to ensure disconnection. Refer all
servicing to qualified service personnel. Servicing is required when the device
has been damaged in any way, such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the device, the device has been
exposed to rain or moisture, does not operate normally, or has been dropped
Ki Pro Ultra 12G File Based Recorder/Player v1.0
audio or video accessory, you must use a ferrite-beaded HDMI cable, HH-28F-06,
between the HDMI output port of the Ki Pro Ultra 12G and the HDMI accessory to
maintain regulatory compliance.
definitively say which devices may or may not communicate as expected with
Ki Pro Ultra 12G when operated under RS-422 remote control.
55.
Ki Pro Ultra 12G has no user-serviceable parts. To remove power from the
"35.2 Remote Control" on
16 www.aja.com