Rear Panel Connectors - AJA Ki Pro Ultra 12G Installation And Operation Manual

File based recorder/player

Hide thumbs Also See for Ki Pro Ultra 12G:

Machine control manual (24 pages)

Table Of Contents

Table of Contents

Headphone Volume Knob

To adjust headphone listening level, press the knob inward and the knob will

then pop out for easy adjustment.

Displays and Indicators

Alphanumeric and Graphics LCD Display

This display shows menus, status, alerts and other information. Some words in

the menus may be truncated to fit the display limits. The LCD displays not only

UI information, but also a scaled version of the incoming signal or playback of

recordings. When the monitoring outputs are set to crop a signal to 1920x1080, a

graticule is applied to the scaled image on the LCD to alert the user.

VU Meters

A video overlay is provided on the LCD to display audio VU meters. Meters are

color-coded to report signal strength:

• Green - audio source signal level is in the "safe" area (no clipping). Vertically,

the green LEDs also show the signal strength, so you can see if the signal level

is low. Generally, it's preferred to have the signal near the top of the green or

even occasionally peaking into the yellow LEDs.

• Yellow - audio source signal levels are at the peak edge of the safe area before

clipping will occur.

• Red - audio source amplitude is too hot and the signal is clipping at its signal

peaks. You should reduce the input gain at its source (camera, mixer or source

equipment supplying the signal).

Slot LED Status Indicator

These LED 1 and 2 states indicate the status of the media slots, S1 and S2:

• LED highlighted/on: selected media

• LED not highlighted/off: inactive media, okay to eject or no media inserted

• LED flashing: recording in progress

Headphone Jack

1/8" (3.5mm) miniature stereo TRS connection for standard stereo headphones.