Playing Back A Clip - AJA Ki Pro Ultra 12G Installation And Operation Manual

3. Go to 1.11 Channels To Record and select 2, 3 or 4 channels. The numbered
SDI input connectors are mapped 1 to 1 to the numbered record channels.
4. You can set different encoding for each channel by pressing the MEDIA
button, going to menus 14.2, 14.3, or 14.4 Channel Encode Type and
selecting the encoding for that channel.
5. You can now push the red RECORD button below the display to initiate
recording on all the channels.
6. When you've finished recording, press the STOP button.
Multiple recorded clips have "_n" appended to their clip names, with "n" being
the 1-4 number of that recording.

Playing Back a Clip

To playback recorded media, select a clip and press PLAY. If the clip you wish to
playback is not currently selected, use the User Control Knob to scroll until the
clip name appears on the bottom right of the display. Like recording, there is
more than one way to initiate playback (front panel or web browser). From the
front panel these are the basic steps:
1. Press the STOP button to get to the Transport mode (if not already there).
Find the clip name in the display (it shows the current Slot, Reel, and Clip
name).
2. Turn the User Control Knob until you find the clip you are looking for.
3. Press the PLAY (>) button.
4. When playing back a clip (PLAY, FFWD, or REV) the first push of STOP acts
as a "Pause" mode: the playback is paused, the current point of the clip
is displayed, and the STOP button will flash. A second push of STOP will
completely stop the playback and Ki Pro Ultra 12G outputs will go into an
"idle" mode (the currently selected inputs are passed to the outputs). When
a playback reaches the end of a clip, it will automatically pause on the last
frame of the clip.
Transport Buttons
During playback you can use the FFWD, REV, SELECT, or User Control Knob as
follows:
FFWD >>
Press button to begin fast playback of the current clip at 2x speed. Successive
pushes increase the speed to 4x, 8x, and 16x. (Pushing the button after 16x speed
is reached has no further effect.) When fast-forwarding, audio is muted.
REV <<
Pressing REV when not highlighted, begins playback of the current clip in reverse
at 1x speed. Successive pushes increase the speed to 2x, 4x, 8x, and 16x. (Pushing
the button after 16x speed is reached has no further effect.) When playing in
reverse, audio is muted for all speeds.
User Control Knob
While in Transport mode, the User Control Knob will scroll through the clips in the
active media. When a clip is selected it is "cued" to the beginning of the clip. Note
that ordering and playback of clips is based on timestamp order, not clip name.
JOG Mode
While in Transport mode, pressing in the Control Knob toggles to Jog mode. (JOG
is displayed in the overlay display). In this mode, turning the Control Knob will
"single step" the current clip one frame forward or backward per scroll-click.
Ki Pro Ultra 12G File Based Recorder/Player v1.0 31 www.aja.com