2. Place the Shield with Spacer (temporary) on top of the Enclosure, aligning
the holes.
3. Slide the Support into the Handle.
4. Place the Handle on top of the Shield, aligning the holes.
5. Place the Clamps on top of the Handle, aligning the holes.
6. Insert the two screws through the Clamps, Handle, Support, and Shield and
into the enclosure.
7. Snap the Caps over the Clamps and tear away the Spacer from the Shield.
KPU-Shelf
AJA offers this rackmount shelf accepting two Ki Pro units in a 2RU footprint.
Figure 26. Ki Pro Ultra 12G in Rackmount Shelf
SFP Modules
See
https://www.aja.com/software/configurator
select compatible SFP modules.
Ki Pro Ultra 12G File Based Recorder/Player v1.0
for an online tool you can use to
78
www.aja.com