AJA Ki Pro Ultra 12G Installation And Operation Manual page 76

File based recorder/player
Hide thumbs Also See for Ki Pro Ultra 12G:
Table of Contents

Advertisement

5. Click the "Browse..." button to select the file you previously downloaded.
For example: Ki ProUltra_1.0.0.153.bin file.
6. When you have selected a valid Ki Pro Ultra 12G .bin image file, click the
"Upload" button in the web browser.
The file you select will upload to Ki Pro Ultra 12G and be tested for validity.
Incomplete, corrupted, or non-Ki Pro Ultra 12G firmware files will be rejected.
7. Agree to the steps and confirmation prompts as they are presented. Wait for
the procedure to complete—it will take only a few minutes.
When done, Ki Pro Ultra 12G will prompt you to restart your machine. After
restart, Ki Pro Ultra 12G will be running the new software. Progress is shown on
the front panel.
8. Once these steps are complete, Ki Pro Ultra 12G will be running the firmware
you just uploaded until the next time you upgrade it.
9. AJA strongly recommends performing a factory reset after updating
Ki Pro Ultra 12G firmware.
NOTE: You may ensure the new software is running by bringing up the Ki Pro Ultra 12G
NOTE: On some browsers, the Retry page may appear even though the firmware
If there is a power outage or glitch during the firmware download,
Ki Pro Ultra 12G will boot the older software version and the upgrade process can
then be re-started. This happens because Ki Pro Ultra 12G has been designed with
a safety feature where an internal "safe" copy of the previous software is retained
in the event the updating process fails.
CAUTION: AJA recommends you only update the Ki Pro Ultra 12G when on mains power,
Ki Pro Ultra 12G File Based Recorder/Player v1.0
web page again. The software version is displayed at the top of all web screens. If
for some rare reason it didn't update, you can then run through the update steps
again.
upgrade was successful. If this occurs, before clicking on retry, refresh the web
page and check the version number. If the new version number appears at the
top of the page, the firmware upgrade was successful. If the old version appears,
click Retry.
or with a fully charged battery.
76
www.aja.com

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents