Table of Contents
Advertisement
Deleting Clips
To delete a previously recorded clip:
1. In Transport mode, use the User Control Knob to browse through the clips
on the current media. When a clip is on another media you will press SLOT
until it's selected.
2. When you find a clip you want to delete, press the Media button, scroll to
16.25 to delete the current clip and press the knob.
3. Ki Pro Ultra 12G asks, "CONFIRM ACTION." Choose OK and press the User
Control Knob to confirm deletion. Pressing any other button, will abort the
deletion.
NOTE: When deleting large clips, Ki Pro Ultra 12G will display a progress status window
Status Menus
The Status menus display I/O status and Alarm information. The Status menu can
be accessed almost anytime and will not change any active transport modes. Use
the User Control Knob to toggle between the tabs for Status display and ALARMS
display. Press the STATUS button or any transport button to return to Transport
mode, where an action could still be occurring (like playback or even recording).
Record Mode
As mentioned earlier in this chapter transport display provides the following:
Top Line
Displays the current clip Format information.
Bottom Line
Displays:
• Percentage of media capacity available
• Current media Slot number
• Current reel number
• Timecode for the clip being recorded or played
• Current clip name
• If closed captioning is present [CC]
Alarm Status
The Alarm menu displays warnings and alarms. Some alarms will automatically
be shown on the top bar of the display. Others will be indicated by the STATUS
button flashing.
Examples of ALARM displays are shown below.
Ki Pro Ultra 12G File Based Recorder/Player v1.0
on the front panel and the WEB UI. Large clips can take up to 30 seconds to
delete. To remove all clips on a drive, it is faster to format the drive.
32
www.aja.com
Hide quick links:
Advertisement
Table of Contents
