AJA Ki Pro Ultra 12G Installation And Operation Manual page 30

Ki Protect Recording Integrity
The Ki Protect feature helps to ensure ProRes data integrity if a media drive
is accidentally removed or loses power during recording. If a recording is
interrupted, the only data loss should be the last few frames that were in transit
to the media drive to be recorded. Frames that are already recorded will be
preserved and are recoverable.
Recording Notes
Ki Pro Ultra 12G alerts you when the media is nearly full with a "Media Low"
prompt at 15% of the remaining capacity. At 10% of the total capacity of the
media, the "Media Full" prompt will appear. Any recordings that have been
started will stop once 10% is reached and no further recordings can be performed
using this media until it is formatted again or a MEDIA>Delete Clips>DELETE ALL
has been performed. Deleting clips to produce more than 10% free space will
allow recording to resume.
Rollover Recording
Ki Pro Ultra 12G lets you record long duration material on two Pak Media drives,
with automatic or manually initiated rollover across the drives. Set the Media
Menu 12.2 Rollover parameter to ON, insert two Pak Media modules, ensuring the
second one is formatted but empty, and initiate your recording. When the first
Pak Media reaches 90% capacity, recording will automatically continue onto the
next drive with no lost frames.
To force a change over before the first drive is filled during a rollover recording,
simply press and hold the Ki Pro Ultra 12G front panel SLOT button for two
seconds.
NOTE: Initiating rollover through the Ki Pro Ultra 12G web UI is not supported.
Infinite Record
The Infinite Record feature lets you use Ki Pro Ultra 12G as an always running
backup recorder. When operating in this mode, clips are recorded to Pak
Media in one slot, and when that media capacity is near filled, Ki Pro Ultra 12G
automatically formats the other slot's Pak Media and switches the recording over
to it, alternating back and forth indefinitely.
CAUTION: During Infinite Record, Ki Pro Ultra 12G automatically formats the next Pak
Recording Multiple Clips
Ki Pro Ultra 12G can record up to four HD clips simultaneously, after it has been
set to Multi Channel Mode.
IMPORTANT: The Ki Pro Ultra 12G recording inputs must be genlocked together, or multi-
IMPORTANT: Multi-channel recording is only supported on Pak 2000 and Pak 1000
1. Press the CONFIG button if necessary to display the configuration menus.
2. Go to menu 1.10 and select Multi Channel. The front panel display will
go blank momentarily, and then the unit will return to operation in Multi
Channel Mode.
Ki Pro Ultra 12G File Based Recorder/Player v1.0
Media to be used, so data loss will occur without user intervention.
channel recording and monitoring failures may occur.
media, and on R1 and later versions of Pak 512 Pak 256 media.
30 www.aja.com