AJA Ki Pro Ultra 12G Installation And Operation Manual page 71

Figure 20. Gang Recording Screen
Click a system name to switch the browser to that particular Ki Pro Ultra 12G
system.
NOTE: You must have a properly configured default gateway to see the Ki Pro Ultra 12Gs.
Multiple Ki Pro Ultra 12G units can be used in unison to produce recordings
via the Gang Control feature. This feature is only available via the web UI when
Ki Pro Ultra 12G units have IP addresses configured under a common network and
subnet mask and are connected via their LAN connections to an Ethernet switch
or hub to a host computer. AJA recommends that all Ki Pro Ultra 12G units in a
gang use the same firmware version.
Example
You have a Ki Pro Ultra 12G "Master" a Ki Pro Ultra 12G "Subordinate" both
attached on a network where their static IP addresses are 192.168.0.2 and
192.168.0.3, both with a subnet mask value of 255.255.255.0. They are connected
to a host computer with IP address 192.168.0.1 and subnet mask 255.255.255.0.
The host computer uses a web browser, like Apple's Safari, to access the "Master"
Ki Pro Ultra 12G by entering 192.168.0.2 in the URL field of the browser. The
Ki Pro Ultra 12G "Master" unit web UI should appear. Locate the Gang Controls
area in the user interface.
Parameters for each available Ki Pro Ultra 12G will appear in the Gang Controls
area. These include:
• System – displays Ki Pro Ultra 12G units that may be added to a gang
• Record Format – type of video format/frame rate each system is configured to
record
• Free Storage – at-a-glance view of the capacity of the media in each unit
• Gang – units can be added or removed from the gang
• Master – allows the promotion of a Ki Pro Ultra 12G unit to the controlling role
• Settings – allows for the configuration of clip names on the Master and
Subordinate Ki Pro Ultra 12G units
To add a Ki Pro Ultra 12G to a gang, simply select the check box for the unit in
the Gang column. As a shortcut, if all available Ki Pro Ultra 12G units are desired
for a gang, select the All item below Gang. If you want to clear units from a gang,
deselect them or use the Clear option.
Ki Pro Ultra 12G File Based Recorder/Player v1.0
If the Default Gateway (parameter 50.4) is not configured properly, other
Ki Pro Ultra 12Gs will not be listed.
71 www.aja.com