AJA® and Because it matters.® are registered trademarks of AJA Video Systems, Inc. for use with most AJA products. AJA™ is a trademark of AJA Video Systems, Inc. for use with recorder, router, software and camera products. Because it matters.™ is a trademark of AJA Video Systems, Inc.
Features 12G/6G SDI The Ki Pro Ultra 12G BNC 1 input and output connectors each support up to 12G SDI on a single link. The SDI Fiber 1 input and outputs also support 12G SDI video. When configured for a Single Encode Channel and selecting one of these video inputs or outputs, Ki Pro Ultra 12G becomes able to record and playback single- link 6G and 12G signals.
Record 1, 2, 3 or 4-Channels of beautiful HD up to 1080p 50/60 in Apple ProRes simultaneously with Ki Pro Ultra 12G. Simplify your multi-camera productions by running up to four cameras per Ki Pro Ultra 12G and save power, space, time and effort on set, in the studio and when setting up OB trucks.
PCs using 3rd-party software that can read HFS+ formatted drives (MediaFour’s MacDrive for example). Ki Pro Ultra 12G can also store files on media using the ExFAT file system, for native macOS and PC operation. Ki Pro Ultra 12G Options...
SFP modules. KPU-Shelf Ki Pro Ultra 12G can be mounted side by side using the optional KPU-Shelf for rackmount applications. Using the four channel HD recording capability and front panel quad display, two rack mounted Ki Pro Ultra 12G units can record and monitor eight HD signals in only two rack units of space.
• 4:2:2 chroma sampling. • 10-bit sample depth (DNxHR HQX or DNxHD HQX), or 8-bit. NOTE: Ki Pro Ultra 12G can accept 12-bit inputs but processes and encodes at 10-bit. • Every frame of encoding is independent. • Constant bit-rate (CBR) encoding.
Caution! The AJA Ki Pro Ultra 12G contains a lithium battery soldered in place permanently (it is not user replaceable). If you ever dispose of the Ki Pro Ultra 12G, ensure you follow local regulations for safe disposal. The lithium battery shall not be exposed to excessive heat, such as sunlight or fire.
Page 11
A second push of STOP completely stops the playback and directs Ki Pro Ultra 12G outputs into an “idle” mode (the currently selected inputs are passed to the outputs). To determine at a glance if the STOP button is in a “pause”...
Page 12
The display button can be used to hide the Config or Status overlay if it is active. User Control Knob The User Control Knob on the right side of the Ki Pro Ultra 12G front panel is used to scroll through and select menu items. After scrolling to, and highlighting a menu item of interest, push the knob to select.
The functions of Ki Pro Ultra 12G inputs and outputs depend on the operational mode. Ki Pro Ultra 12G active input (the one to be recorded) is selected by front panel or web browser control. Ki Pro Ultra 12G outputs are active all the time.
The 2 BNCs are a passive loop: one BNC is for the Input, and the remaining BNC can be connected to another piece of equipment in the reference chain or terminated. Ki Pro Ultra 12G File Based Recorder/Player v1.0 www.aja.com...
Page 15
3G SDI operation and embedded 24-bit digital audio. NOTE: Which audio channels are embedded to the SDI Outputs is determined by the audio embedding settings being used for the Ki Pro Ultra 12G audio input, or the audio channels of the clip being played back.
NOTE: When using the Ki Pro Ultra 12G HDMI connection and attaching it to any HDMI audio or video accessory, you must use a ferrite-beaded HDMI cable, HH-28F-06, between the HDMI output port of the Ki Pro Ultra 12G and the HDMI accessory to maintain regulatory compliance.
Reel NAME parameter is the name of the media that will appear when the media is mounted. Once the media is mounted, each clip recorded by Ki Pro Ultra 12G will be a file on its file system, which (depending on the file type) can be opened directly in non-linear editors such as Final Cut Pro, Adobe Premiere Pro, etc.
Avid Media Composer without transcoding. To use the Avid DNxHD QuickTime files produced by Ki Pro Ultra 12G in Avid Media Composer, AJA recommends using the "Link to AMA File(s)" feature provided in Avid Media Composer.
Ki Pro Ultra 12G. A standard North American line cord with 3-prong plug is included. • Handle Installation Kit Please save all packaging for shipping the Ki Pro Ultra 12G should you need to do Applying Power The following Warnings are provided as good practices and should always be considered when Ki Pro Ultra 12G is used in a desktop application.
To begin using Ki Pro Ultra 12G, plug the 4-pin XLR on the supplied AC adapter into the XLR power socket on the rear of Ki Pro Ultra 12G. Then plug the AC adapter line cord into 110 VAC or 230 VAC (the supply is auto sensing). Two power supplies can be used for redundancy.
You should now see Ki Pro Ultra 12G browser status screen. NOTE: If Ki Pro Ultra 12G fails to find a DHCP server via its network connection, it will fall back to using the factory default static IP of 192.168.0.2—or whatever IP address you’ve previously defined.
Page 22
Figure 4. Configuring Ki Pro Ultra 12G with a Static IP Address Use the User Control Knob to navigate to Con g item 50.1 Use the User Control Knob to navigate to Con g item 50.2 Use the User Control Knob to navigate to Con g item 50.3...
Networking Ki Pro Ultra 12G Using the Factory Default IP If you don’t want to use DHCP to network Ki Pro Ultra 12G and also don’t want to set your own static IP address, you can simply use a Default setting to use a factory setting of 10.65.74.65.
Page 24
You must remove any connected fiber or coaxial cables from the SFP modules before you remove the modules from the Ki Pro Ultra 12G. Pull down the SFP lever to free the module before you withdraw the module from the cage.
Chapter 4 – Front Panel Operation Overview There are two ways to control Ki Pro Ultra 12G—from the front panel or remotely from a web browser connected via the Ethernet RJ-45 connector. This chapter discusses controlling Ki Pro Ultra 12G from its front panel. See "Chapter 5 Browser...
Display Mode Operations In Status, Config, and Media modes, you use the User Control Knob to scroll through menu items (rotating) and make selections (pressing the knob). Figure 6. Ki Pro Ultra 12G User Control Knob User Control Knob Overlay Display Content Initial Overlay The figure below shows an overlay display with video content behind.
Page 27
The following figure shows an example of a display of a Config menu. Media menus are similarly organized. Figure 9. Front Panel Display Config Menu Example Ki Pro Ultra 12G File Based Recorder/Player v1.0 www.aja.com...
Audio Meters A large audio VU meter is available to display the level for the Ki Pro Ultra 12G's headphone audio. This meter can be shown or hidden by pressing the front panel Display button. You can select which audio channel pair to display, from the up to 16 channels supported, which is indicated by the CH numbers shown below the meter.
When set for a Single Encode Channel (Single Channel Mode) and the Ki Pro Ultra 12G is receiving a 12G signal on the SDI 1 or Fiber 1 input, the unit automatically configures itself to record and playback 6G and 12G signals.
Page 30
Recording Notes Ki Pro Ultra 12G alerts you when the media is nearly full with a “Media Low” prompt at 15% of the remaining capacity. At 10% of the total capacity of the media, the “Media Full” prompt will appear. Any recordings that have been started will stop once 10% is reached and no further recordings can be performed using this media until it is formatted again or a MEDIA>Delete Clips>DELETE ALL...
STOP button will flash. A second push of STOP will completely stop the playback and Ki Pro Ultra 12G outputs will go into an “idle” mode (the currently selected inputs are passed to the outputs). When a playback reaches the end of a clip, it will automatically pause on the last frame of the clip.
Control Knob to confirm deletion. Pressing any other button, will abort the deletion. NOTE: When deleting large clips, Ki Pro Ultra 12G will display a progress status window on the front panel and the WEB UI. Large clips can take up to 30 seconds to delete.
Page 33
May appear if a format or frame rate that is not supported is supplied to the Ki Pro Ultra 12G or a link of a multi-link signal (dual link or quad link) is missing; no recordings will be produced if this alarm appears.
Page 34
May appear if the media has issues being mounted by the Ki Pro Ultra 12G. As the prompt indicates, it is best to back up the media by copying it to another hard drive or disk array and then reformat the media.
24-bit 48kHz audio, if audio is included. Files copied to Ki Pro Ultra 12G that do not meet these criteria may not appear in the web UI or front panel UI when you review clips.
Page 36
After such an event, it returns to the default Record-Play mode. IMPORTANT: When the Ki Pro Ultra 12G is in the Media State and the Data - LAN selection is used, only the web UI for control and configuration of the Ki Pro Ultra 12G may be used for data transfer.
Page 37
NOTE: When Infinite Record is initiated, the Ki Pro Ultra 12G Rollover recording feature is automatically enabled When Infinite Record is ON, Ki Pro Ultra 12G will continuously record to its first Pak Media. When that media approaches its capacity (15% remaining), Ki Pro Ultra 12G automatically formats and erases its second Pak Media.
Page 38
All/Playlist—Plays the current clip and then continues playing Playlist the next clip on the Ki Pro Ultra 12G media or the playlist. Note that with this setting, Ki Pro Ultra 12G will play all clips back regardless of format or frame rate—but you may notice the video monitor reset for format/frame rate changes.
Page 39
Press Control Knob and CONFIRM ACTION to Delete all clips on the storage device NOTE: Ki Pro Ultra 12G media can be used to hold any data file. If other files are saved to the media, placing them outside of the “AJA” folder will prevent them from being deleted if a MEDIA>Delete Clips>DELETE ALL is performed.
Page 40
Clip Number Clip Append NONE Alpha Append Take The resulting clip would have the following naming convention: “Clip12TK1”. The media would be named “002” if mounted on a desktop as a volume. Ki Pro Ultra 12G File Based Recorder/Player v1.0 www.aja.com...
Page 41
Reel Name, Clip Name, Clip Number, Clip Append, Alpha Append, and Take settings. • If the number is at “999”, Ki Pro Ultra 12G will record a clip with take 999, but then cannot auto advance so the second attempt to record will generate a “Name In Use”...
Channel clip identifier not added. Channel clip identifier is appended to the file name. This feature is useful if you wish to use a camera position instead of the default channel number. For example: Ki Pro Ultra 12G File Based Recorder/Player v1.0 www.aja.com...
Page 43
This parameter is used to capture of CEA-708 Closed Captioning data as QuickTime movie tracks. On recording, Ki Pro Ultra 12G extracts CEA-708 (including 608 within 708) packets contained in the vertical ANC data embedded in the SDI input (BNC or Fiber) signal.
As in the Media menus already presented, pressing the User Control Knob and scrolling changes the current Config parameter’s value to a new one from the Ki Pro Ultra 12G list of choices—repeating the list if you continue to scroll—or adjusting a numerical value up or down.
Page 45
Record one clip. 4K UltraHD is supported. Multi Channel Record up to four clips. HD only. IMPORTANT: The Ki Pro Ultra 12G recording inputs must be genlocked together, or multi- channel recording and monitoring failures may occur. 1. 1 1 Channels to Record (Multi Channel Mode only.) This parameter determines the number of multiple...
Page 46
1920x1080P, the Ki Pro Ultra 12G outputs 1080 HD on the SDI and HDMI Monitor outputs. Also, if the 4K Crop to UltraHD “In Convert” selection is used, the Ki Pro Ultra 12G will output 1080 HD on the SDI and HDMI Monitor outputs.
Page 47
• Determine your video source format and frame rate. • Decide whether you want a Full Raster or Scaled output. • Determine whether your connected device can support 4096x2160 or 3840x2160. Ki Pro Ultra 12G File Based Recorder/Player v1.0 www.aja.com...
Page 48
Range. HDR menu settings or incoming HDMI metadata will not change the Ki Pro Ultra 12G's built-in monitor display characteristics. To successfully use the Ki Pro Ultra 12G HDR menus you will need to know the HDR information associated with that specific video material: •...
Page 49
(Single Channel Mode only.) Sets the format of the SDI Monitor outputs. Normal (default) No conversion is applied to the monitoring output Out Convert Scaled video is additionally cropped to 1080 (if the source is not already 1080) Ki Pro Ultra 12G File Based Recorder/Player v1.0 www.aja.com...
Page 50
(Single Channel Mode only.) This parameter selects a video input source from the video input connectors that are available. This selection impacts the type of video that can be recorded and/or passed through. Ki Pro Ultra 12G File Based Recorder/Player v1.0 www.aja.com...
Page 51
IMPORTANT: If in Single Channel Mode a 6G or 12G signal is present on the Ki Pro Ultra 12G's SDI 1 or Fiber 1 input, Ki Pro Ultra 12G will automatically configure itself to support the 6G/12G input signal. In this case SDI/Fiber inputs 2-4 will be disabled, and user settings made in this menu will be ignored.
Page 52
NOTE: When configured for a 12G or 6G signal, this menu is hidden and Ki Pro Ultra 12G runs as 2SI. Auto (default) Attempts to use VPID to determine the input format. If there is a signal/format mismatch a warning/alarm is raised.
Page 53
8 channels of input to the upper 8 channels (9-16) of your SDI destination. For Ki Pro Ultra 12G encoding, you cannot route the upper 8 channels (9-16) to your encoded clip unless 16 Channel audio is selected in 2.3 Audio Channels.
Page 54
9.0 Interval Record The Ki Pro Ultra 12G can be used to create time-lapse recordings via the 9.0 Interval Record, 9.1 Interval Frames and 9.2 Interval Time selections.
Page 55
Enables RS-422 control Control from RS-422 To control the Ki Pro Ultra 12G via the RS-422 port, this Configuration option must be set to RS-422 Only. If this option is not set, the device will look to the controller as if the tape is ejected. Once a clip is selected, frame accurate playback control of the current clip is immediately possible.
Page 56
Ki Pro Ultra 12G. NOTE: While the Ki Pro Ultra 12G may be configured for a YCbCr or RGB signal generator, the output is ultimately determined by the selection made in the 1.6 SDI Out menu parameter.
Page 57
41.2 Video SG This parameter determines the video signal output from Ki Pro Ultra 12G's internal test signal generator. This parameter is used with parameter 41.1 to determine the type of video test signal output by Ki Pro Ultra 12G.
Page 58
NOTE: Without a properly configured default gateway (whether you have a router/ gateway or not), Ki Pro Ultra 12G will be unable to see other Ki Pros on the network, although you may still be able to control the Ki Pro Ultra 12G via a web browser.
Page 59
50.5 System Name This parameter defines a name for Ki Pro Ultra 12G and gives it a unique identifier. This same name is used both when displaying systems via the web interface. variable Using the User Control Knob, enter a name for Ki Pro Ultra 12G.
Page 60
RIO DE JANEIRO BEIRUT HONG KONG 55.71 Daylight Savings This parameter manually sets the internal Ki Pro Ultra 12G clock for either Daylight Savings or Standard Time. The options are: • Daylight Savings ON • Daylight Savings OFF 70. 1 0 Screen Saver Timeout This parameter sets the number of minutes before Screen Saver dims the Ki Pro Ultra 12G LCD display.
The source device is outputting a 12G-SDI 4K YCbCr 59.94 signal over a single link BNC that is connected to the Ki Pro Ultra 12G's SDI 1 input. The user wants to encode the input as Apple ProRes 422 HQ at a 4K raster size, and simultaneously convert it to an UltraHD 12G signal.
Page 62
Encode Type Apple ProRes 422 (HQ) In Convert has been set to None, so the signal recorded on the Ki Pro Ultra 12G media has a 4K raster size. Out Convert and SDI Monitor Output conversions have been selected, so the Ki Pro Ultra 12G's SDI 1 and Fiber 1 outputs are cropped to UltraHD, and the Monitor output is cropped and downconverted to 1920x1080p 59.94.
Page 63
No In Convert has been selected so the signal that is recorded on the Ki Pro Ultra 12G media is the same as what is output by the camera. An Out Convert selection has also not been made because the parameter does not allow conversion if the incoming video signal is 1080;...
Ki Pro Ultra 12G, consider using an alternate web browser and report any issues experienced to AJA Technical Support. To control Ki Pro Ultra 12G remotely, connect a computer to the Ki Pro Ultra 12G LAN connector, an RJ-45 socket, via a CAT5 Ethernet cable.
Page 65
To access Ki Pro Ultra 12G, enter its URL in the web browser. The URL will be the IP address defined in Ki Pro Ultra 12G Network parameter menus (Note that Config menu parameters 50.1 through 50.4 must all be configured correctly to access Ki Pro Ultra 12G on your network).
Page 66
IP address. NOTE: If you change the Static IP address of the Ki Pro Ultra 12G camera, you may need to power cycle the Ki Pro Ultra 12G so that the host computer correctly identifies the new IP address.
Page 67
Additionally, a pulldown menu above the emulation of the Ki Pro Ultra 12G user interface area allows you to turn on tooltips for the buttons in this area. ...
Clicking on the blue arrow icon on the top right of the screen opens and closes a Transport pane. A graphical representation of the Ki Pro Ultra 12G front panel is shown, with operational transport buttons. Simply click on a button to rewind, play, fast forward, stop, or a loaded clip, or record a new clip.
Figure 19. All Clips Playlist Screen The default state of the Playlists is to list All Clips available. All Clips represents all of the recordings made on the Ki Pro Ultra 12G or valid files transferred to the Ki Pro Ultra 12G.
Gang Recording At-a-glance you can see all of the Ki Pro Ultra 12G systems that are present on the same local LAN in the Connection section of the web UI. Their system names are shown in the Network panel on the right side of the screen.
Page 71
Subordinate Ki Pro Ultra 12G units To add a Ki Pro Ultra 12G to a gang, simply select the check box for the unit in the Gang column. As a shortcut, if all available Ki Pro Ultra 12G units are desired for a gang, select the All item below Gang.
There can be only one Master in a gang; typically, the IP address for the Ki Pro Ultra 12G unit you entered and are viewing the web UI on is the one which should be promoted to the controlling role. If the unit with the IP address that is currently being viewed via the web UI is selected, a red capitalized MASTER text will appear on the web page above the columns.
Ki Pro Ultra 12G. Files copied to Ki Pro Ultra 12G that do not meet these criteria may not appear in the web UI or front panel UI when you review clips.
Page 74
The file gets exported to the default download location specified in your browser options with the name "all.presets". If you export multiple files, a number gets appended to ensure a unique file name. Ki Pro Ultra 12G File Based Recorder/Player v1.0 www.aja.com...
In some cases, these files may “decompress” automatically, such as when using Safari and Mac OS X. The firmware image that you’ll install on Ki Pro Ultra 12G is a file with a name like KiProUltra12G_1.0.0.100.bin or similar.
Page 76
9. AJA strongly recommends performing a factory reset after updating Ki Pro Ultra 12G firmware. NOTE: You may ensure the new software is running by bringing up the Ki Pro Ultra 12G web page again. The software version is displayed at the top of all web screens. If for some rare reason it didn’t update, you can then run through the update steps...
Chapter 6 – Ki Pro Ultra 12G Accessories Overview Ki Pro Ultra 12G's design allows a variety of accessories to be used with the device. AJA provides some of these accessories as optional items that may be purchased separately. The Ki Pro Ultra 12G's handle and desktop feet are included with the unit and, if wanted, are easily installed.
7. Snap the Caps over the Clamps and tear away the Spacer from the Shield. KPU-Shelf AJA offers this rackmount shelf accepting two Ki Pro units in a 2RU footprint. Figure 26. Ki Pro Ultra 12G in Rackmount Shelf SFP Modules https://www.aja.com/software/configurator...
• Apple ProRes 422 (HQ) • Apple ProRes 422 • Apple ProRes 422 (LT) • Apple ProRes 422 (Proxy) *Avid DNxHD only supported for 1080 and 720 resolutions **Avid DNxHD 36 only supported for 1080p Ki Pro Ultra 12G File Based Recorder/Player v1.0 www.aja.com...
Page 80
Codec Container • Apple ProRes .MOV • AVID DNX .MXF or .MOV Removable Storage • 2x slots, AJA SSD media Pak 2000, Pak 1000, Pak 512, Pak 256 File System Support • HFS+, exFAT Video Input Digital • 1x 12G-SDI, SMPTE-292/372/424/2081/2082 •...
Page 81
Playback Mode • One channel of 4K/UltraHD/2K/HD at a time Timecode • SDI RP188/SMPTE 12M via SDI BNC • LTC input (1x BNC) • LTC output (1x BNC) • TC Super Out Ki Pro Ultra 12G File Based Recorder/Player v1.0 www.aja.com...
Page 82
User Interface • Rotary selector knob • Dedicated, backlit transport controls and menu buttons • Large 1280x720 TFT LCD display with Video Monitor and Menu/Status Overlays Closed Captioning Support • CEA-708, CEA-608 Ki Pro Ultra 12G File Based Recorder/Player v1.0 www.aja.com...
AUSTRIA, BELGIUM, BULGARIA, CYPRUS, CZECH REPUBLIC, DENMARK, ESTONIA, FINLAND, FRANCE, GERMANY, GREECE, HUNGARY, IRELAND, ITALY, LATVIA, LITHUANIA, LUXEMBOURG, MALTA, NETHERLANDS, POLAND, PORTUGAL, ROMANIA, SLOVAKIA, SLOVENIA, SPAIN, SWEDEN, UNITED KINGDOM, ICELAND, LICHTENSTEIN, NORWAY, SWITZERLAND Ki Pro Ultra 12G File Based Recorder/Player v1.0 www.aja.com...
Page 87
For more information about where you can drop off your waste for recycling, please contact your local authority, or where you purchased your product. Ki Pro Ultra 12G File Based Recorder/Player v1.0 www.aja.com...
Page 88
This product meets the requirements of implementation rules for compulsory certification (REF NO. CNCA-C08-01:2014) under certificate number 2016010805842057. Translated Warning and Caution Messages The following caution statements, warning conventions, and warning messages apply to this product and manual. Ki Pro Ultra 12G File Based Recorder/Player v1.0 www.aja.com...
Page 89
(incluindo amplificadores) que produzam calor. Avviso! Non installare vicino a fonti di calore come termosifoni, diffusori di aria calda, stufe o altri apparecchi (amplificatori compresi) che emettono calore Ki Pro Ultra 12G File Based Recorder/Player v1.0 www.aja.com...
Page 90
Advertência! Não abra o chassi. Não há internamente nenhuma peça que permita manutenção pelo usuário. Abrir o chassi anula a garantia, a menos que a abertura seja realizada por uma central de serviços da AJA ou por um local autorizado. Avvertenza! Non aprire lo chassis. All’interno non ci sono parti riparabili dall’utente.
Page 91
è stato rovesciato del liquido è stato rovesciato o qualche oggetto è caduto nel dispositivo, il dispositivo è stato esposto a pioggia o umidità, non funziona correttamente o è caduto Ki Pro Ultra 12G File Based Recorder/Player v1.0 www.aja.com...
Page 92
Aviso! Dado que a ficha principal é utilizada como a desconexão para o dispositivo, esta deve manter-se prontamente acessível e funcional. Avviso! Poiché il cavo di alimentazione viene usato come dispositivo di sconnessione, deve rimane prontamente accessibile e operabile. Ki Pro Ultra 12G File Based Recorder/Player v1.0 www.aja.com...
Page 93
A bateria de lítio não deverá ser exposta a calor excessivo, como por exemplo, luz do sol ou lume. ¡Cuidado! El AJA Ki Pro Ultra 12G contiene una batería de litio soldada en su lugar de forma permanente (no es reemplazable por el usuario). Si alguna vez decide deshacerse del Pro Ultra Ki, asegúrese de seguir las regulaciones locales para la...
Page 94
Warning! Ki Pro Ultra 12G has no user-serviceable parts. To remove power from the unit, remove the 4-pin XLR power connector to ensure disconnection. Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the device, the device has been exposed to rain or moisture, does not operate normally, or has been dropped.
If the Customer brings a valid claim under this limited warranty for a hardware product or storage module (hereafter, a “product”) during the applicable warranty period, AJA Video will, at its sole option and as the Customer’s sole remedy for breach of the above warranty, provide one of the following remedies: •...
Page 96
This limited warranty gives you specific legal rights and you may have other rights that vary from jurisdiction to jurisdiction, some of which are noted above. Ki Pro Ultra 12G File Based Recorder/Player v1.0 www.aja.com...
RS-422 55 Clip Recording 29 Media Button 12, 32 Clip Selection Media Formatting 7 Web UI (Mouse Wheel) 69 Media Menu 35 HDMI Closed Captioning 18 Media State 35 Formats Supported 15 Ki Pro Ultra 12G File Based Recorder/Player v1.0 www.aja.com...
Page 98
Ref Loop 14 Update Firmware 75 Remote Control 55 Use Channel Clip Identifier 42 Reorder Clips 70 Use Custom Clip Name 42 REV Button 11 User Authentication 59 RJ-45 Connector 64 Rollover 36 Ki Pro Ultra 12G File Based Recorder/Player v1.0 www.aja.com...