AJA Ki Pro Ultra 12G Installation And Operation Manual page 58

50.2 IP Address
This parameter determines the static IP address used by Ki Pro Ultra 12G for TCP/
IP networking.
variable
NOTE: For parameters 50.2, 50.3, and 50.4, you will be setting IP addresses that consist of
50.3 Subnet Mask
This parameter determines the subnet mask used by Ki Pro Ultra 12G for TCP/IP
networking.
variable
Please read the "Note" about editing IP addresses in parameter 50.2 as it also
applies to parameters 50.3 and 50.4.
50.4 Static Gateway
This parameter determines the gateway or router used by Ki Pro Ultra 12G on your
LAN for TCP/IP networking.
variable
NOTE: Without a properly configured default gateway (whether you have a router/
Ki Pro Ultra 12G File Based Recorder/Player v1.0
"octets" separated by a period (i.e., 10.0.181.0). To edit these, press the User Control
Knob to access the alpha-numeric keyboard to enter the desired IP Address. When
complete click the SAVE function.
gateway or not), Ki Pro Ultra 12G will be unable to see other Ki Pros on the
network, although you may still be able to control the Ki Pro Ultra 12G via a web
browser. Also, without a proper gateway defined, the discovery feature "Available
Ki Pros—Click to Refresh" on the Network web page will not work correctly and
list other Ki Pros or FS1s on the network.
Using the User Control Knob, enter an IP address compatible
with your LAN (if you have one). If direct connecting to a
computer, enter a legal IP address that you'll also enter in
the computer's web browser. This is only needed for Static IP
configurations.
NOTE: If 50.1 is set to DHCP and there is a DHCP failure, then the
default IP address is: 192.168.0.2
NOTE: If 50.1 is set to Default Addr, the default static IP address
is: 10.65.74.65
Using the User Control Knob, enter a subnet mask compatible
with your LAN (if you have one). This is only needed for Static
IP configurations.
NOTE: If 50.1 is set to DHCP, the default Subnet Mask will be
assigned by the DHCP server
NOTE: If 50.1 is set to Default Addr, the default Subnet Mask is:
255.0.0.0
Using the Adjust buttons, enter a gateway compatible with
your LAN (if you have one). This is only needed for Static IP
configurations.
NOTE: If 50.1 is set to DHCP, the default gateway will be
assigned by the DHCP server.
NOTE: If 50.1 is set to Default Addr, the default gateway is:
10.0.0.1.
58 www.aja.com