AJA Ki Pro Ultra 12G Installation And Operation Manual page 45

1. 1 0 Encode Channels
This parameter determines whether a single clip will be recorded (Single Channel
Mode), or multiple clips will be simultaneously recorded (Multi Channel Mode).
Single Channel (default)
Multi Channel
IMPORTANT: The Ki Pro Ultra 12G recording inputs must be genlocked together, or multi-
1. 1 1 Channels to Record
(Multi Channel Mode only.) This parameter determines the number of multiple
clips (2-4) will be recorded in Multi Channel mode. The numbered SDI input
connectors are mapped 1 to 1 to the numbered record channels.
NOTE: In Multi Channel Mode, multiple clips have "_n" appended to their names, with
2 channels
3 channels
4 channels (default)
1. 1 5 SDI Monitor Channel
(Multi Channel Mode only.) Controls which channels are displayed by the SDI
Monitor output.
Channel 1
Channel 2
Channel 3
Channel 4
All Channels (default)
1. 1 6 HDMI Monitor Channel
(Multi Channel Mode only.) Controls which channels are displayed by the HDMI
output (see above).
1.3 Progressive Playback
This parameter defines the format applied when progressive media is played
from storage.
Progressive (default)
PsF
NOTE: HDMI output of progressive material requires the use of 1080p Playback set to
Ki Pro Ultra 12G File Based Recorder/Player v1.0
Record one clip. 4K UltraHD is supported.
Record up to four clips. HD only.
channel recording and monitoring failures may occur.
"n" being the 1-4 channel number of that clip.
Record two clips simultaneously.
Record three clips simultaneously.
Record four clips simultaneously.
Display only channel 1 (clip_1)
Display only channel 2 (clip_2)
Display only channel 3 (clip_3)
Display only channel 4 (clip_4)
Display all four channels in quadrants.
Playback as standard progressive frame
Playback as progressive segmented frame (regardless of what
Progressive; HDMI only tends to support true progressive or interlace video, not
PsF.
was recorded when input)
45 www.aja.com