Final Reduction Disassembly; Final Reduction Inspection - KYMCO DINK50 Service Manual

8
. FINAL REDUCTION
FINAL REDUCTION DISAS-
SEMBLY
Remove the rear wheel. (  14-3)
Remove the left crankcase cover. (  7-3)
Remove the clutch/driven pulley. (  7-12)
Drain the transmission gear oil into a clean
container.
Remove the transmission case cover
attaching bolts.
Remove the transmission case cover.
Remove the gasket and dowel pins.
Remove the final gear and countershaft.

FINAL REDUCTION INSPECTION

Inspect the countershaft and gear for wear
or damage.
8-3
www.PlanDeGraissage.org
Dowel Pin
Final Gear Countershaft
Countershaft
B o l t s
Driver shift
Driver shift
Dowel Pin