To Exercise Library Elements; Unload Drives; To Unload A Drive; Figure A-11 Unload Drives Screen - Sun Microsystems Enterprise Tape Library 7/3500 Field Service Manual

To Exercise Library Elements

Press the Exercise Library button in the Operator screen.
An "In Progress" dialog box is displayed.
The exercise process runs continuously until you stop the process by pressing the ABORT
button. The exercise process is also stopped if an error is detected.

Unload Drives

This command prepares a tape cartridge to be ejected from a drive by disengaging the tape
from the read/write heads and rewinding it. After unloading the drive, you can eject and
remove the tape cartridge using the Move Cartridge command described earlier in this
chapter.

To Unload a Drive

1. In the Operator screen, press the Unload Drive button.
The Unload Drive screen is displayed (Figure A-11).
System
Offline
Standby
Load Port
S
Stop
FIGURE A-11
2. Use the Left and Right Arrow buttons to select the desired tape drive.
176 Sun Enterprise Tape Library 7/3500 Field Service Manual • July 1997
Back Forward
Overview Tapes Operator Operator
Control: Unload Drive
Drive 0
Drive 1
Drive 2
_
Drive:
Drive 3
Execute
Unload Drives Screen
Home
Service