M To Find A Disk's Device Name And Scsi Id On An Update D2 - Sun Microsystems StorEdge D2 Array Installation, Operation And Service Manual

To Find a Disk's Device Name and SCSI ID on
M
an Update D2 Page
This procedure shows how to click on the name of each device in turn on the
Network Storage Agent Maintain Devices HTML page until you locate a disk listed
by its device name on the Maintain Devices: Update D2 page.
Note – In this example, ses1 and ses3 are the names associated with the ESMs'
SCSI device: /dev/es/ses1 and /dev/es/ses3.
1. On the Maintain Devices page shown below, in the List Existing Devices table,
click on the name of a device in the Name column.
2. On the Maintain Devices: Update D2 page shown below, click the Identify button
at the bottom of the table.
3-10 Sun StorEdge D2 Array Installation, Operation, and Service Manual • February 2002
Identify button