Sun Microsystems Enterprise Tape Library 7/3500 Field Service Manual page 215

Sense Data Values (Hexadecimal) (Continued)
TABLE B-1
Sense
Key ASC ASCQ
5 24 00
5 25 00
5 26 00
5 26 02
6 28 01
6 29 00
6 2A 01
Message Name/Description
INVALID FIELD IN COMMAND DATA
BLOCK
Ensure all reserve fields are set to zero.
LOGICAL UNIT IS NOT SUPPORTED
Verify the logical unit field specified in the
command contains a legitimate logical unit
number. Check cabling to logical unit.
INVALID FIELD IN PARAMETER LIST
Verify Mode Select page fields.Verify that
fields comply with the command format
described in the Sun ETL 7/3500 Software
Interface Guide.
PARAMETER VALUE INVALID
Verify Mode Select page fields. Verify that
fields comply with the command format
described in the Sun ETL 7/3500 Software
Interface Guide.
This response will also be returned for
commands issued to the "Diagnostic"
interface of the library if an invalid
parameter is sent.
IMPORT OR EXPORT ELEMENT
ACCESSED
Load port door has been closed.
POWER-ON, RESET OR BUS DEV. RESET
OCCURRED
Informational message. If power on occurs,
the host user should assume the inventory
may have been corrupted, and should ask
the library for that information again.
MODE PARAMETERS CHANGED
Mode parameters may have changed due to
another host issuing a Mode Select
command.
Appendix B
Interface
SCSI
SCSI
SCSI
Both
Both
Both
SCSI
Sense Data Values 185