Sun Microsystems Enterprise Tape Library 7/3500 Field Service Manual page 219

Sense Data Values (Hexadecimal) (Continued)
TABLE B-1
Sense
Key ASC ASCQ
5 80 01
B 80 01
B 80 06
2 80 07
6 80 07
6 80 08
2 80 09
Message Name/Description
TRANSFER FULL - COMMAND CAN NOT
BE EXECUTED
Gripper has cartridge in it. Move cartridge to
empty storage element using Move Medium
command. Retry command.
TRANSFER FULL - AT END OF PLACE
Gripper has cartridge in it at end of a place
operation (Move Medium with a target other
than the Transfer). Move cartridge to empty
storage element using Move Medium
command. Retry command.
TRANSFER EMPTY - COMMAND
ABORTED
Gripper does not contain cartridge at end of
pick portion of Move Medium command.
SYSTEM IS STOPPED (BUTTON IS
CURRENTLY PUSHED)
The control panel STOP button was pressed.
Press the STOP button.
SYSTEM STOP BUTTON WAS PRESSED
(MAY CURRENTLY BE PRESSED)
The control panel STOP button was pressed.
Press the STOP button. Retry command.
LOGICAL UNIT TURNED ONLINE
The library is ready to communicate with the
host computer. Press the control panel
STANDBY button to take the library offline.
LOGICAL UNIT IS TURNED OFFLINE
The library is ready to communicate with the
diagnostic PC. Press the control panel
STANDBY button to place the library online.
Appendix B
Interface
Both
Both
Both
Both
Both
Diag
SCSI
Sense Data Values 189