Operator Screen; Configure Library; To Configure Library Attributes; Figure A-6 Config.: Library Screen - Sun Microsystems Enterprise Tape Library 7/3500 Field Service Manual

Operator Screen

You can obtain detailed information on how to configure the library, configure the library
options, move a cartridge, calibrate library elements, and unload a drive.
Configure Library
This Configure Library command enables you to assign the following:
Library model number
Number of storage bins
Number of drives
Library SCSI ID
Tape drive SCSI IDs
To Configure Library Attributes:
1. In the Operator screen, press the Configure Library button.
The Config: Library screen is displayed with the current configuration settings
( ).
FIGURE A-6
Back
Overview
System
Config.: Library
Offline
Standby Inquiry: ATL ACL 4/52 6210090 2.10
Model: 6210090
#Bins: 48 #Drives: 4
Load Port
Library
Drive 0
Drive 1
Drive 2
Drive 3
S
Stop
Config.: Library Screen
FIGURE A-6
Forward
Home
Tapes Operator Operator
SCSI ID: 0
SCSI ID: 2
SCSI ID: 3
SCSI ID: 4
SCSI ID: 5
Configure
Service
Appendix A Control Panel Menus 169