Initialize Nonvol Statistics; Initialize Nonvol Config; Change Password - Sun Microsystems Enterprise Tape Library 7/3500 Field Service Manual

3. Press the Select button.
If you selected the Move To option, the Move To screen is displayed for you to specify the
destination of the move. Select an element type to move to and specify the position in inches
from home for the destination. Press Select to start the move.

Initialize Nonvol Statistics

This command purges NVRAM of all statistical information about library operation (the
information reported with Statistics on the Service screen).
Initialize Nonvol Config
This command returns the library configuration to the factory defaults, negating any changes
made using Configure Library and Configure Options on the Operator screen.

Change Password

This command is used to change the operator password or service password. Passwords must
be four to eight numbers in length.
182 Sun Enterprise Tape Library 7/3500 Field Service Manual • July 1997