Table of Contents
Advertisement
4. Installation
This chapter contains step-by-step instructions for installing, connecting and
verifying that the STS16-20RM and/or STS16-20FRM Token Ring switch is
operating properly.
Installation Summary
The installation sequence is listed in the following steps.
1. Plan for installation. Read Chapter 3, "Preparing for Installation".
2. Unpack the switch.
3. Gather the materials.
4. If you will be installing expansion modules, install them now.
5. Mount the switch.
6. Connect the switch to the network.
7. Verify the operation of the switch.
Note: Complete the following step only if you will be customizing the
configuration of the switch or monitoring its activity.
8. Configure the switch.
Note: For information on front panel and back panel connectors, buttons, slots, and
LEDs, please see "Front Panel Details" on page 5 and "Back Panel Details" on
page 10 in Chapter 1.
Installation
SmartStack STS16-20RM/STS16-20FRM Token Ring Switches, P/N: 9032957-01
53
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the SmartSTACK STS16-20RM and is the answer not in the manual?