Cabletron Systems SmartSTACK STS16-20RM Installation And User Manual page 95

81
Module
Module number. The switch is listed as module 1. Expansion cards are listed as
module 2 and module 3. The stack port is listed as module 4.
Status
Whether the module is up, down, failed, or the slot is empty.
Model
Type of module. The SmartStack switch is listed for the base switch. For this
module as well as for others, this field displays the product number.
ID
Decimal identifier of the module.
HW Rev
Hardware revision level. If (4K) is displayed after the number, this uplink will
prevent the switch (or stack of switches) from operating with an MTU size above
4,472 bytes. If HW Rev is set to NA, the module does not support reading of the
hardware revision..
FW Rev
Firmware revision level.
Ports
Number of ports on the module.
Up Time
Amount of time that the module has been up (since the last reset). Display only.
Switch Configuration SmartStack STS16-20RM/STS16-20FRM Token Ring Switches, P/N: 9032957-01