Protocol Class Assignment Screen - Cabletron Systems SmartSTACK STS16-20RM Installation And User Manual

122

Protocol Class Assignment Screen

To open this screen, do the following:
1. From the main menu, select Configuration
select Protocol Filters...
2. On the Protocols Filters screen, select Protocol Class Assignment...
The Protocol Class Assignment screen shows the 15 protocol classes that may be
defined by the user. Note that Class 0 is the default class and will contain all DSAPs
and Ethertypes not assigned to any other class.
You modify a class by highlighting the class and pressing
prompted for the field to modify: Name, Ethertype or DSAPs. When all classes
have been defined as desired, select Return to save the values and exit the screen.
Class
For the selected port, use the Class field to select a class to modify.
Ethertype
The Ethernet protocol type that you want to filter. You can specify one Ethertype
(in its 4-digit hexadecimal format) for each of the classes 1 through 8. You cannot
specify an Ethertype for protocol classes 9 through 15.
DSAPs
List of the DSAPs that you want to filter. You can specify up to 16 DSAPs (in their
hexadecimal format) separated by spaces.
SmartStack STS16-20RM/STS16-20FRM Token Ring Switches, P/N: 9032957-01
Filters & Port Security. Then
. You will then be
ENTER
Switch Configuration