Password Menu - Cabletron Systems SmartSTACK STS16-20RM Installation And User Manual

Password Menu

To open this menu from the main menu, select Configuration
There are two types of user rights, Read/Write and Read-Only. Read/Write users
have full access. Read-Only users will not be able modify the configuration of the
switch.
Use the Password menu to add, change, or delete a password. If you establish a
password, users must enter it to access the console menus. If there is no password,
just press
ENTER
Set Read/Write Password
Establishes or changes the password for Read/Write access.
Delete Read/Write Password
Deletes the password for Read/Write access.
Set Read-Only Password
Establishes or changes the Read-Only password.
Delete Read-Only Password
Deletes the Read-Only password.
The system prompts you to enter the present password before it allows you to
change or delete the password. If you are establishing a new password, press
at the Set Password prompt.
Switch Configuration
at the password prompt.
SmartStack STS16-20RM/STS16-20FRM Token Ring Switches, P/N: 9032957-01
129
Password.
ENTER