Figure 3-12 Connecting a VT Series Terminal
➀
UTP cable with RJ45 connector
➁
RJ45 Console Port
3.10.4 Connecting to a Modem
To connect a modem to an Enterasys Networks switch Console port
cable with RJ45 connectors and an optional RJ45-to-DB25 male adapter (PN 9372112), and
proceed as follows:
1. Connect the RJ45 connector at one end of the cable
Enterasys Networks switch.
2. Plug the RJ45 connector at the other end of the cable
3. Connect the RJ45-to-DB25 adapter
4. Turn on the modem
Ã
Â
➂
RJ45-to-DB25 VT adapter
➃
VT series terminal
➂
to the communications port on the modem
➃
.
Connecting to Console Port for Local Management
À
➀
to the Console port
➀
into the RJ45-to-DB25 male adapter
Á
(Figure
3-13), use a UTP
➁
on the
➃
.
Hardware Installation
➂
.
3-21