Advertisement
Operation
Settings
Wired TCP/DHCP
3-92
42iQTL Instruction Manual
The Wired TCP/DHCP screen allows the user to communicate with the
instrument via wired TCP/IP settings.
Note When DHCP is enabled, the dynamic IP address is used. When
DHCP is disabled, the static IP address is used.
Home Screen>Settings>Communications>Wired TCP/DHCP (with
DHCP enabled)
Home Screen>Settings>Communications>Wired TCP/DHCP (with
DHCP disabled)
The Wired TCP/DHCP screen contains the following information:
DHCP: Toggles DHCP Enabled/Disabled.
●
Dynamic IP Address: Dynamic IP address of the instrument.
●
Dynamic Netmask: Dynamic Netmask of instrument.
●
Dynamic Gateway: Dynamic Gateway of instrument.
●
Static IP Address: Static IP address of the instrument. This is settable
●
when DHCP is disabled.
▲
Thermo Scientific
Advertisement
Chapters
