Advertisement
Thermo Scientific
Digital I/O
The Digital I/O screen provides status and alarms related to the digital
input/output module. If an item being monitored goes outside the lower or
higher alarm limit, an alarm is activated.
Use the and buttons to move up and down and the and
buttons to move left and right.
Home Screen>Settings>Health Check>Status and
Alarms>More>Digital I/O
The Digital I/O screen contains the following information:
Across:
●
Digital IO: This column lists items associated with the digital I/O.
●
Value: Displays the current value for each item.
●
Reset: Resets item.
●
Low Alarm: Displays low alarm status for each item.
●
High Alarm: Displays high alarm status for each item.
●
Units: Displays units for each item.
●
Down:
●
Solenoid 1–8: Displays whether or not the solenoid is activated by
●
showing the current in mA.
External Alarm 1–3: Displays OK/Fail for external alarms.
●
Relay Test Mode: Displays relay test mode on or off.
●
Solenoid Test Mode: Displays solenoid test mode on or off.
●
Board Communication: Displays OK/Fail for communication status.
●
Operation
Settings
42iQTL Instruction Manual
3-61
Advertisement
Chapters
