Wired Tcp/Dhcp - Thermo Scientific 43iQ Instruction Manual

Wired TCP/DHCP

Thermo Scientific
The Wired TCP/DHCP screen allows the user to communicate with the
instrument via wired TCP/IP settings.
Note When DHCP is enabled, the dynamic IP address is used. When
DHCP is disabled, the static IP address is used.
Home Screen>Settings>Communications>Wired TCP/DHCP (with
DHCP enabled)
Home Screen>Settings>Communications>Wired TCP/DHCP (with
DHCP disabled)
The Wired TCP/DHCP screen contains the following information:
DHCP: Toggles DHCP enabled/disabled.
G
Dynamic IP Address: Dynamic IP address of the instrument.
G
Dynamic Netmask: Dynamic Netmask of instrument.
G
Dynamic Gateway: Dynamic Gateway of instrument.
G
Operation
Settings
L
43iQ Instruction Manual
3-79