Wan Commands - Cabletron Systems CSX1200 User Manual

USER'S GUIDE
sentry ace
Attempts an authentication session using ACE. The system will report whether the
authentication attempted was successful or rejected.
WAN C
OMMANDS
The following commands are used to display current system WAN diagnostic information:
wan fr-ietf stats [device/fr_accessname_dlci] [prot]
Displays the current frame relay IETF related statistics. Refer to
list of available statistics and their definitions.
wan stats
Displays the current WAN statistics. Refer to
their definitions.
X.25 C
OMMANDS
The following commands are used to display information concerning both the status and traffic
statistics of a particular X.25 connection. A command is also available to allow the X.25 and LAPB
packet tracing options to be enabled or disabled.
trace lapb [on/off]
Enables or disables the LAPB data link information packet tracing option. This feature displays
up to 15 octets of the packet. To display the log file, issue the dr console command. This option
is initially disabled.
trace x25 [on/off]
Enables or disables the X.25 packet tracing option. This feature displays up to 15 octets of the
packet. To display the log file, issue the dr console command. This option is initially disabled.
x25 clear
Clears the statistics counters associated with the x25 stat command for the currently
selected access and LCN.
x25 clearall
Clears all statistics associated with the x25 stat command for the currently selected access
and LCN.
x25 display [access name]
Displays the configuration for the default X.25 access if no access name is specified. If an access
name is specified, the configuration for that access is displayed. Note that this also includes any
configuration information of any PVCs associated with this access.
x25 l <LCN "m">
The "l" option will set the Logical Channel Number (LCN) index specified by "m" as the
default LCN for subsequent commands entered without an explicit LCN specifier. LCN "m"
will remain the default LCN until the default is changed through reissuing the x25 l <lcn
"m"> command.
558 CyberSWITCH
WAN FR_IETF
WAN Statistics for a list of available statistics and
Statistics, for a