Installation And Configuration - Cabletron Systems CSX1200 User Manual

USER'S GUIDE
SNMP
SITE.HQ
Network Management
Station
WORKGROUP REMOTE ACCESS SWITCH
SNMP: The NMS gathers information (including problem reports) from any CyberSWITCH
SNMP (Simple Network Management Protocol) is a standard way of monitoring communication
devices in IP networks. With SNMP, you purchase and then set up a Network Management Station
(such as SPECTRUM® or SPECTRUM® Element Manager™) for your environment. This Network
Management Station (NMS) is then used to monitor your network. From the NMS you can look at
information from all the CyberSWITCHes and other remote devices. You can detect problems
without manually check each machine to see if it is working correctly.
I C
NSTALLATION AND
SNMP has two basic components: the SNMP Agent, which is executed on the CyberSWITCH, and
the Network Management Station (NMS), which you purchase separately for the environment. This
504 CyberSWITCH
LINE LINE LINE LINE
LAN 1 2 3 4
POWER SERVICE TX RX 10BASE-T CH-1 CH-2 CH-1 CH-2 CH-1 CH-2 CH-1 CH-2
SYNC D-CH SYNC D-CH SYNC D-CH SYNC D-CH
AGI
ONFIGURATION
WORKGROUP REMOTE ACCESS SWITCH
LAN
POWER SERVICE TX RX 10BASE-T
ISDN
WORKGROUP REMOTE ACCESS SWITCH
LINE LINE LINE LINE
LAN 1 2 3 4
POWER SERVICE TX RX 10BASE-T CH-1 CH-2 CH-1 CH-2 CH-1 CH-2 CH-1 CH-2
SYNC D-CH SYNC D-CH SYNC D-CH SYNC D-CH
AGI
SITE.2
LINE LINE LINE LINE
1 2 3 4
CH-1 CH-2 CH-1 CH-2 CH-1 CH-2 CH-1 CH-2
SYNC D-CH SYNC D-CH SYNC D-CH SYNC D-CH
AGI