Cabletron Systems CSX1200 User Manual page 119

i/f 1 1.0.0.1
i/f 2 2.0.0.1
i/f 1 2.0.0.2
POWER
SERVICE
i/f 2 3.0.0.2
3.0.0.11
For the WAN interface to function properly with IP RIP, additional WAN interface information is
configured. The additional information required involves selecting one of the following: disabling
host routes propagation (needed for Example 1), or enabling host routes propagation (needed for
Example 2). The definition of this configuration element is included in the section
Configuration Elements.
Network 1
R 1
Network 2
LAN B-CHANNELS E1 ONLY
B1 B3 B5 B7 B9 B11 B13 B15 B17 B19 B21 B23 B25 B27 B29 B31
TX RX 10BASE - T
D E1 D T1
B2 B4 B6 B8 B10 B12 B14 B16 B18 B20 B22 B24 B26 B28 B30 L1
CSX1200
ISDN
3.0.0.13
WAN RIP Interfaces: Example 2
C
ONFIGURING
(1.0.0.0)
(2.0.0.0)
i/f 1 2.0.0.3
LAN B-CHANNELS E1 ONLY
POWER SERVICE TX RX 10BASE - T B1 B3 B5 B7 B9 B11 B13 B15 B17 B19 B21 B23 B25 B27 B29 B31
E1 T1
D D
B2 B4 B6 B8 B10 B12 B14 B16 B18 B20 B22 B24 B26 B28 B30 L1
CSX1200 i/f 2 3.0.0.3
3.0.0.12
Network 3
(3.0.0.0)
Workgroup Remote Access Switch
B IP R
ASIC OUTING
IP Network Interfaces
Network Interface
119