Cabletron Systems CSX1200 User Manual page 522

USER'S GUIDE
ws
Writes the current system statistics to disk file.
Note: For details on these disk files, refer to the chapter titled
C O
LEARING PERATIONAL
The following commands are used to clear current system operational information:
er
Erases the current system messages held in memory.
es
Erases the current system statistics held in memory.
C -R
ONFIGURATION ELATED
The following commands provide configuration file information, and restore backup configuration
files:
cfg
Provides information on the status of system configuration changes. With Manage Mode and/
or CFGEDIT, you can make changes to the system configuration. (This, in turn, changes the .nei
files.) If you do not commit these changes (Manage Mode) or restart your system (CFGEDIT),
these changes do not become current. This command identifies whether or not changes have
been made which are not yet current. The command will display the following information:
Unsaved Manage Mode Changes Exist.........YES (or NO)
restore
Replaces the current configuration files with the configuration backup files (.bak files) located
in the \CONFIG directory, thus restoring the previous system configuration. Because this
command will destroy your current configuration, a warning is displayed when issued:
WARNING:This command overwrites your current configuration files. Are you sure
you want to restore your old configuration? (Y or N)
If you indeed want to restore the old configuration, type "Y". If not, type "N" (default).
Note that you must have saved configuration changes at least one time before the restore
command will work.
522 CyberSWITCH
I
NFORMATION
C
OMMANDS
Cfgedit Changes Have Been Saved...........YES (or NO)
System Data Differs from Config Files.....YES (or NO)
To Synchronize System Data With Config Files........
RESTART THE SYSTEM
Software
(or COMMIT FROM MANAGE MODE)
Overview.