System Information; Configuring System Information; System Information Configuration Elements - Cabletron Systems CSX1200 User Manual

USER'S GUIDE
The following table summarizes the identifying and authenticating information used by each
remote device type to connect to the system:
Device Type
HDLC Bridge
(MAC Layer
Bridge)
IP Host
(with RFC 1294
encapsulation)
PPP
S I
YSTEM NFORMATION
C S
ONFIGURING YSTEM
U CFGEDIT
SING
1. Select option (2), System Information from the System Options and Information menu. If you
need guidance to find this menu, refer to the instructions provided in the
configuration section. The following screen will be displayed:
System Information Menu:
1) System Name
2) System Password
3) System Secret
Select function from above or <RET> for previous menu: 1
2. Select the option you wish to configure and press <RET>. Follow the onscreen instructions to
configure the option you select. These values are required only if there are remote devices on
the network that require this information for system validation.
S I
YSTEM NFORMATION
S N
YSTEM AME
The System Name is a user-defined name for the CyberSWITCH. This name is preconfigured, but
may be changed. It is from 1 to 17 ASCII characters in length. The System Name is only used if there
are remote devices on the network that require this information for system validation. This name
is passed in the name field during PAP negotiation.
150 CyberSWITCH
Identifier
Bridge Ethernet
Address
or
Calling Line Id
IP Host Id
Device Name
I
NFORMATION
is "ralph"
is "ralph"
is "ralph"
C E
ONFIGURATION LEMENTS
Authenticator
Bridge Ethernet Address
Optional: Password
Optional: Calling Line Id
IP Host Id
Optional: Calling Line Id
CHAP Secret
or
PAP Password
Optional: Calling Line Id
System Options