Limitations - Cabletron Systems CSX1200 User Manual

Common Portion:
IP Source Address
IP Destination Address
Protocol Field
Protocol-Specific Portion TCP:
Source Port
Destination Port
Control
Protocol-Specific Portion, UDP:
Source Port
Destination Port
Protocol-Specific Portion, ICMP:
L
IMITATIONS
System performance will be affected by the number of packets, conditions and filters configured.
The more elements you have configured, the slower system performance. Refer to the following
chart for the maximum number of elements supported:
Maximum # Packet Types
Maximum # Conditions
Maximum # Filters
Note: If a packet is defined, it is counted toward the maximum number of packets allowed. Be
aware that this applies even if:
• the packet is not used in a condition, and
• the filter is not enabled.
AND mmm.mmm.mmm.mmm EQ/NEQ ttt.ttt.ttt.ttt
AND mmm.mmm.mmm.mmm EQ/NEQ ttt.ttt.ttt.ttt
EQ/NEQ TCP/UDP/ICMP/ANY/<n>
EQ <port> / NEQ < port > /GT < port > / LT < port > /
RANGE <p1> <p2>
EQ <port> /NEQ < port > / GT < port > / LT < port > /
RANGE <p1> <p2>
ANY / ESTABLISHED / NOT-ESTABLISHED
EQ <port> / NEQ < port > /GT < port >/ LT < port > /
RANGE <p1> <p2>
EQ <port> /NEQ < port > / GT < port > /LT < port > /
RANGE <p1> <p2>
Type
Code
Central Office
Remote Access Switches
100
100
25
C
ONFIGURING
EQ / NEQ n / ANY
EQ / NEQ n / ANY
Remote Access Switches
(single BRI port)
Workgroup Remote Access Switch
A IP R
DVANCED OUTING
IP Filters
Work Group
25
25
10
255