Cabletron Systems CSX1200 User Manual page 622

USER'S GUIDE
Command
neif
pkt capture <connection mode>
pkt mac
pkt [on/off]
pkt display
pkt load <filename>
pkt save <filename>
pswd
radius chap
radius iphost
radius ipres
radius macres
radius pap
recover
restore
restart
sentry ace
sentry radius
sentry status
sentry log
session
session kill <session id>
snmp stats
sp
status
tcp conns
tcp stats
622 CyberSWITCH
Use
displays the interface table
specifies which packets will be captured by the packet
capture feature (all, reqd, pend, actv, idle, or none)
enables the MAC address monitor display
enables or disables the Packet Capture feature
displays captured packets
loads previously saved Packet Capture file into memory
saves captured packets to a disk file
(GUEST) changes password for current access level
attempts a RADIUS authentication session using CHAP
attempts a RADIUS authentication session using IP Host
resolution
attempts a RADIUS authentication session using IP
resolution
attempts a RADIUS authentication session using MAC
resolution
attempts a RADIUS authentication session using PAP
notifies the boot device that you are attempting a
download of SSB software
copies backup config files into current files
restarts the system program remotely using Telnet
attempts an authentication session using ACE
attempts an authentication session using RADIUS
displays current status of user level authentication servers
logs rejection messages from the authentication server
displays the current active administration sessions
terminates the active session specified by the session id
displays current SNMP related statistics
lists each semi-permanent device and associated status
(GUEST) displays system errors and system messages
displays the current TCP connection status
displays the current system TCP statistics