Off-Node Device Database Location; Configuring Off-Node Device Database Location - Cabletron Systems CSX1200 User Manual

USER'S GUIDE
The following table identifies the configuration requirements for possible security options for IP
Routing with PPP Bridge Devices.
Security Mode Configuration
Calling Line Id
Disabled
Enabled
Enabled
Note: If CHAP Security is enabled, and Outbound Authentication has not been disabled, a CHAP
Secret must be entered for both the remote device and for the CyberSWITCH. Refer to
System Information
disabled, a CHAP Secret is not required for the remote device.
O - D
FF NODE EVICE
C O -
ONFIGURING FF NODE
U CFGEDIT
SING
1. Select Off-node Device Database Location from the Device Level Databases menu. If you need
guidance to find this menu, refer to the instructions provided in the
configuration section. The following screen will be displayed:
Off-node Device Database Location Menu:
1) None (Use On-node)
2) VRA Manager
3) RADIUS
Current Off-node Device Database Location is "None (Use On-node)".
Select function from above or <RET> for previous menu:
2. Select the location of the off-node device database, or select None in order to use the on-node
device database.
174 CyberSWITCH
PAP or CHAP Calling Line Id
Security
Enabled Not Requested
Enabled Optional per
device entry
Disabled Required
regarding the System Secret. If Outbound Authentication has been
D L
ATABASE OCATION
D D
EVICE ATABASE
On-node Device Table Configuration Data
PAP Password
or
CHAP Secret
Required
Required
Optional
L
OCATION
IP (Sub)
Network
Number
Required if
only IP
Routing is
Enabled
Required if
only IP
Routing is
Enabled
Required if
only IP
Routing is
Enabled
On-node Device Database