Equipment Description - Kemppi X5 FastMig Series Operating Manual

1.1 Equipment description

X5 FastMig has several power source and wire feeder options to choose from. The control panel is always fixed to
the wire feeder.
X5 FastMig supports welding cable calibration without an additional measuring cable.
X5 power sources:
• X5 Power Source 400 (400 A)
• X5 Power Source 500 (500 A)
• X5 Power Source 400 (WP) (400 A, work pack version)
• X5 Power Source 500 (WP) (500 A, work pack version).
For the power source part descriptions, refer to "X5 Power source" on page 9.
X5 wire feeders:
• X5 Wire Feeder 300 Manual
>> Comes with 2-knob membrane control panel
• X5 Wire Feeder 300 Auto
>> Comes with 2-knob 5.7" TFT/LCD control panel
>> Includes automatic 1-MIG process that supports welding programs and Wise features
For the wire feeder part descriptions, refer to "X5 Wire feeder" on page 11, "X5 Wire spools and hubs" on page 13 and
"X5 Wire feed mechanism" on page 13.
For the control panel descriptions, refer to "X5 Manual control panel (X5 FP 300R)" on page 14 and "X5 Auto control
panel (X5 FP 300)" on page 15.
X5 cooling units:
• X5 Cooler, 1 kW.
For the cooling unit part descriptions, refer to "X5 Cooling unit (optional)" on page 18.
MIG welding guns:
• Flexlite GX welding guns.
For more information on the Flexlite GX welding guns, refer to
Welding programs:
Welding programs and Wise features are available with the automatic, 1-MIG-enabled wire feeders.
• Welding program work pack (factory-installed or on-demand / at the time of purchase)
• Additional 1-MIG welding programs (on-demand / at the time of purchase)
• Additional Wise features: WiseSteel, WiseFusion and WisePenetration+ (on-demand / at the time of purchase).
For more information on selecting welding programs, contact your local Kemppi dealer.
Optional accessories:
• 4-wheel cart with gas bottle rack
• 2-wheel cart
• Wire feeder cart
• Wire feeder rotating plate, single and double
• Wire feeder hanger for boom, single and double
• Wire feeder counterbalance arm
• Wire feeder cabinet heater
© Kemppi
Kemppi Userdoc.
7
X5 FastMig
Operating manual - EN
1920960 / 2039