Troubleshooting; General; Misfeeds / Jams; Misfeed / Jam In The Feeder - Formax Atlas C350 Operator's Manual

Automatic air-feed programmable folder/creaser

Table of Contents

3. Troubleshooting

If a misfeed or a jam condition should occur, it is indicated on the machine display. A mes-

sage with the jam description, error code and approximate jam location is displayed.

NOTE:

Clicking on the fault code will open a short description of the issue.

1. Inspect the feed belt area for misfed sheets.

2. Inspect the registration area for misfed sheets.

3. If the sheet has been damaged, discard it. Otherwise, reposition it back on the lift.

4. Once the area has been cleared press the green check mark on the screen.

1. Click Clear jams on the jam screen or go to Tools and click Clear jams.

2. Open the top cover and inspect the area. If possible, remove the jammed sheet. Re-

moving the rotary tool carrier and creasing blade(s) may help accessing the sheet.

3. If not, close the top cover and use the controls on the screen to jog the rollers to help

with removing the sheet.

4. Once the area has been cleared, re-insert the rotary tool carrier and close the top

cover. Press the green check mark on the screen.

Continued on next page...

Table of Contents