Formax Atlas C350 Operator's Manual page 62

2
NOTE:
If optional optional Crease tool is fitted you can also choose which crease tool to use by clicking
the Crease tools button.
62
3. Click the Proof button to run a
single sheet. Inspect the output:
• If the job is as desired click the
green check mark to confirm the
job and return to the Home
screen.
• If the job requires adjustment
click the Adjust pattern button
4. Each pattern has an adjustment
screen that allows making small
corrections to crease positions
to achieve the desired output.
Use the + / - buttons to make the
adjustment and press the Proof
button to run another proof sheet.
When satisfied click the green
check mark.
5. On the Home screen click the
Play button to start the machine
cycle.