Counters - Formax Atlas C350 Operator's Manual

Counters

Once the machine cycle is started by default this machine will continue processing sheets
until there is no more paper on the table. Alternatively, the machine can be configured to
run in batch mode:
• Stop mode – the machine will stop after the specified number of sheets has been
processed. If another cycle is started by the operator another batch with the specified
number of sheets will be processed.
• Pause mode – the machine will pause for a short time after the specified number of
sheets has been processed and start processing another batch automatically.
NOTE:
It is convenient to set up batch mode with a short pause to let the operator work in
tandem with the machine. While the machine is paused the operator can remove the
finished sheets from the stacker and pack or process them further while the machine
produces the next batch.
To set up batch mode:
1. Choose Counter from the top menu
on the Home screen
NOTE:
Current total and batch counters
are displayed at the bottom of the
Home screen. They can be reset at
any time by clicking the Clear but-
tons.
2. Select the desired batch size.
Selecting the infinity symbol (∞)
switches off batching.
3. Selected batch mode – Pause
or Stop.
4. For pause mode specify the
desired pause duration between
batches.
5. Click the green check mark to
con-firm your selection and
return to the Home screen.
2
67