Adjusting Crease Depth - Formax Atlas C350 Operator's Manual

Adjusting Crease Depth DynaCrease
1. Run a proof sheet and inspect the output.
1
2. If the crease is too shallow or too deep loosen the locking knobs.
3. Adjust pressure lever on the DynaCrease bridge as shown (A – shallower crease, B –
deeper crease).
4. Tighten the locking knobs.
24
Jobs
Home Media Tools
Fold Crease
Pattern
Letter fold
Counter: 2300
Clear
Batch: 23/50
Clear
Counter
ABC 123*
Job
SRA3
0.15mm, 200gsm
Media
AUTO
Feeder
B
A