Table of Contents
Advertisement
Limitations of the Atlas C350
•
The intended average monthly sheet volume for the Atlas C350 is 450,000.
•
Maximum creasing and folding hourly productivity of this machine is 6,000 sheets.
This is measured using 200 gsm 8.5x11" paper short edge feed with a single crease
and fold in the middle of the sheet.
•
Maximum creasing-only hourly productivity of this machine is 8,500 sheets. This is
measured using 200 gsm 8.5x11" paper short edge feed with a single crease in the
middle of the sheet using the first (optional) creaser.
•
Paper quality affects the output quality of this machine. If the sheets entering this
machine are not uniform and square, the output will vary accordingly.
•
The Shut Down Rate (SDR) of this machine is 1/2000 feeds.
•
Feeder paper capacity is limited to:
•
200 mm (7.9") for sheets up to 700 mm (27.6") in length
•
100 mm (3.9") for sheets longer than 700 mm (27.6")
4
92
Advertisement
Table of Contents
