Advertisement
TROUBLESHOOTING
To remove jammed paper, use one of the following procedures.
Removing a sheet of paper coiled around the roller inside the machine:
1. Turn on power.
2. Remove any remaining paper from the Infeed Slot.
3. Shift paper feed setting lever to the Manual Feed position.
4. Press the start button. This will rotate the roller to discharge the jammed
paper.
If the previous method does not work, try the following:
1. Disconnect the power cord and detach the paper support and catch tray
from the machine.
2. Lay the machine on its back and pull up the lower edge of the front cover.
The cover is secured by a magnet and can be opened by pulling it up with
gentle force.
3. Once the cover is open, press the Jam Release Lever which is located on
the left inside the front cover. This will make the roller move freely.
4. Remove the jammed paper by gently pulling it out.
5. Check the inside of the machine by looking into the Paper Removal Slots
located on the bottom of the machine. If any bits of paper can be seen,
remove them with tweezers, pulling out through the bottom slots.
4
Advertisement
