Fault Codes; List Of Fault Codes - Formax Atlas C350 Operator's Manual

Fault Codes

List of Fault Codes

To address fault codes other than those specified below, remove any paper in the paper
path and power the system off and on again. If the fault code persists, contact a certified
service technician.
Feed section - FE
Fold section - FO
List of fault codes that can be rectified by the operator:
FE-101 – Misfeed
3
FE-102 – Double sheet
FE-103 – Sheet too long
FE-104 – Sheet too short
FE-106 – Out of paper
FE-108 – Paper table overloaded
FE-109 – Too much paper
FE-112 – Double sheet detector (DSD) blocked
FO-301 Fold Jam between units B
FO-302 Fold Jam between units C
FO-305 Fold Fold 1 Sensor not covered in time
FO-306 Fold Fold 1 Sensor not uncovered in time
FO-309 Fold Folder 1 Position Error
FO-310 Fold Folder 2 Position Error
FO-311 Fold Folder Position Error
FO-312 Fold Exit Sensor not covered in time
FO-313 Fold Exit Sensor not uncovered in time
FO-314 Fold Edge Sensor not covered in time
FO-315 Fold Edge Sensor not uncovered in time
Continued on next page...
74