1
A - Top shaft
B - Drive wheel
C - Perforation blade
NOTE:
Up to 5 rotary blades can be mounted on the rotary tool carrier.
3. Using a 2 mm hex key loosen one of the drive wheels [B] and slide it away from any
obstructing drive wheels or hubs in order to mount the blade.
4. Mount a matching pair of blades [C] and secure them to the drive wheel using a 2.5 mm
hex key.
5. Using a 2 mm hex key loosen one of the drive hubs [E] and slide it away from any ob-
structing drive wheels or hubs in order to mount the anvil.
34
A
B
D
E
C
F
D - Bottom shaft
E - Drive hub
F - Anvil
Continued on next page...