Pre-Set Patterns - Formax Atlas C350 Operator's Manual

Pre-set Patterns

To set up one of the pre-defined creasing patterns:
Jobs Jobs Tools Tools
Home Home Media Media
Fold Fold Crease Crease
Pattern Pattern
Letter fold Letter fold
Counter: Counter: 2300 2300
Batch: Batch: 23/50 23/50
NOTE:
You can also choose Custom job to set up your own pattern. See "Custom Job" section
of this manual for details.
Letter fold (tri-fold)
Concertina fold (Z fold)
Half fold A
Half fold V
Engineering fold
Gate fold
Closed gate fold
Counter Counter
ABC 123* ABC 123*
Job Job
SRA3 SRA3
0.15mm, 200gsm 0.15mm, 200gsm
Media Media
AUTO AUTO
Feeder Feeder
Clear Clear
Clear Clear
1. Click the Pattern button on the
Home screen
NOTE:
Choosing a new pre-set pattern
will reset any fine adjustments
that may have been entered on
other screens.
2. Select one of the pre-defined
crease/fold patterns. The left
column contains patterns for typi-
cal folded jobs. The right column
contains patterns for book cov-
ers, typical for crease only jobs.
NOTE:
The position of the Crease Switch
and Fold Switch define patterns
that can be selected.
Double parallel fold
Equally spaced creases
Spine crease
Hinge crease
Hinge crease with front flap
Hinge crease with rear flap
Hinge crease with two flaps
Continued on next page...
2
61