Table of Contents
Advertisement
TROUBLESHOOTING
A. Clearing Paper Jams and Fault Signals on the Display Panel:
WARNING: Turn off machine and unplug cord from its receptacle.
1. If a jam occurs in a fold table, unplug and remove the fold table and remove paper. Reinstall and plug in fold
table and then press the counter reset button on the control panel to clear the fault signal.
2. If a jam occurs in between the metal sealing rollers, remove any remaining forms from the hopper. Open
the top cover and remove the upper fold table. Remove the jam-clearing tool (located under the top fold table),
apply the tool to the upper metal roller (fi gure 4) and turn clockwise until the paper jam is clear. (Caution: Do
not apply excessive force or rollers may be damaged.) (Caution: Do not turn counter-clockwise and force the
form(s) to exit the machine or the rollers may be damaged.) Remove the jammed form, return tool to holder
and reinstall the upper fold table. Reinstall cover and press the reset button.
Note: Press the black button (fi gure 5) near the power cord inlet to reset the breaker if necessary.
Figure 4
Figure 5
B. Paper Pulls Left or Right During Feeding:
1. Adjust the side guides to the edge of the forms.
2. Clean the three infeed wheels with a cloth dampened with a mild household cleaner.
C. Skewed Forms
1. If paper folds left or right adjust the skew adjuster. To adjust the skew, turn it left or right until the paper is
feeding correctly and folds squarely (fi gure 6)
Figure 6
2. Side guides should be adjusted so that the forms do not have free play between the guides.
6
Advertisement
Table of Contents
