Table of Contents
Advertisement
Fold-Off Stacker Settings
NOTE:
To make sure the magnetic paper guides are not too tight put a single sheet of paper
between the stack and the guide when setting the guide.
1. Take a single sheet from the stack and use it to set the magnetic stacker guides to the
correct paper size. Use the lever [H] to raise the stacker guides from the surface to
make them easier to move.
2. Follow steps 1 & 2 on Stacker Settings page.
3. Press either direction button [E] to increase or decrease fan speed.
4. Fan speed is displayed as a percentage in the centre of the direction arrows [E].
5. Run more sheets to check adjustment has improved stacking, repeat if necessary.
G
2
H
55
Advertisement
Table of Contents
