Perforation Depth Adjustment Procedure - Formax Atlas C350 Operator's Manual

Perforation depth adjustment procedure

WARNING!
All blades are very sharp: use extreme caution. Leather gloves must be worn
whenever handling the blades.
NOTE:
Before adjusting depth of perforation ensure the anvil strip does not require
replacement.
1. Locate the tools supplied with the Cross Perforation kit.
2. Place the cross perforation tool on a table in the orientation shown below.
3. Adjust [A] (bolt [B] & nut [C]) to increase or decrease depth of perforation.
B
C
4. Turn nut(s) [C] anti-clockwise to unlock.
5. Rotate bolt(s) [B] 90° anti-clockwise to increase perforation depth. Or. Rotate bolt(s) [B]
90° clockwise to decrease perforation depth.
6. Hold bolt(s) [B] in position and turn nut(s) [C] clockwise to lock.
A
A
NOTE:
Rotating bolt/s [B] 360° increases/decreases
depth of perforation by 1mm.
1
43