Table of Contents
Advertisement
Change Crease Blades
When replacing creasing blades choose the currently installed creasing blades on this screen.
A
B
Element
Description
A
Creaser 1
Quick Release Blade Static Creaser
Optional
NOTE:
The perforation blade option can be chosen.
B
Creaser 2
DynaCrease Blade Set
NOTE:
Not compatible with perforation.
C
Blade buttons Choose the type of blade currently installed in each creaser: [Stand-
ard], [Narrow], [Extra Narrow] or [Perforation]. Based on this setting
machine parameters will be adjusted to suit the blade.
D
Direction
Set the creasing direction (up or down) of each creaser.
buttons
NOTE:
The perforation blade direction cannot be chosen.
E
Home position
Use this button to move the creasing mechanism to its home position.
button
This helps when inserting / removing the blade set.
NOTE:
For blade set replacement instructions, see the "Replacing Dynamic Crease Blade
Sets" or "Replacing Quick Release Blade Sets" section within this manual.
C
E
D
2
71
Advertisement
Table of Contents
